HomeCoursesAutomotiveCertificate II
Certificate II · national qualification
Certificate II in Automotive Servicing Technology
This is a hands-on starting point for work in an automotive workshop, built around the routine servicing that keeps cars and light vehicles on the road.

- How long it takes
- 6 to 12 months
- full time at TAFE NSW
- What it costs
- From $1,010
- Subsidised at TAFE NSW, full fee up to $5,920
- How you can study
- On campus
- Main job
- Mechanic's Assistant
- $59,800 (estimate) median pay
- Taught by
- 14 providers
- 6 states and territories
Is this course right for you?
What the Certificate II in Automotive Servicing Technology asks of you, and what you might want to check first.
It helps to have
- an interest in how cars and light vehicles work
- a careful approach to safety in a workshop
- good hand skills for using and maintaining tools
- a willingness to follow steps and check your work
Before you start
The qualification has no set entry requirements, but each provider can add its own.
Where this course can take you
Jobs this qualification is a recognised route into, and the study that can follow it.
Jobs you can do with it

Mechanic's Assistant
Mechanic's assistants handle the lifting, preparation and parts side of workshop jobs so qualified mechanics can get on with the repair.
What else you need
Automotive servicing support duties; this is not a qualified motor mechanic or licensed-trade route.
Median pay$59,800 (estimate)
Pay is the median for everyone in the job, and “In demand” means the job is on the national shortage list. Pay marked as an estimate is our own analysis, not a published figure.
What it costs
Subsidised place
From $1,010
at TAFE NSW. Whether you get a subsidised place depends on your state, residency, age and earlier study.
Paying the full fee
$5,920
across the TAFEs listed below. Private providers set their own fees.
| TAFE | State | Subsidised | Concession | Full fee | How long |
|---|---|---|---|---|---|
| TAFE NSW | NSW | $1,010 | $160 | $5,920 | 6 to 12 months |
TAFE NSWNSW
- Subsidised
- $1,010
- Concession
- $160
- Full fee
- $5,920
- How long
- 6 to 12 months
Fees as each TAFE shows them on its website, read 20 September 2026. Private providers set their own fees.
Where you can study this course
There are 14 places you can study this course. When you compare them, check they teach it the way you want to study, how far you'd be from a campus, what it will cost you and what past students say about the teaching and support. They're listed by how often people search for them, and none of them pays to be here or to move up.
- Course page for TAFE NSW (opens in a new tab)

TAFE NSW
2 campuses, NSW
4.0from 2,410 Google reviews
- How you study
- On campus
- How long
- 6 to 12 months
- Fee
- From $1,010 subsidised
What students like
- Teachers are supportive and ready to help
- Staff are helpful and friendly
- Course content is practical and industry relevant
What to weigh up
- Enrolment and admin can be slow
- Some find front desk staff less helpful
- Website for Charles Darwin University (opens in a new tab)
Charles Darwin University
12 campuses, NSW, NT
4.2from 619 Google reviews
What students like
- Admin and support staff are helpful
What to weigh up
- Units vary depending on the lecturer
- Feedback on assessments can vary
- Website for TAFE SA (opens in a new tab)

TAFE SA
26 campuses, SA
4.4from 1,339 Google reviews
What students like
- Lecturers are nice and helpful
What to weigh up
- Enrolment and admin can be slow
- Course information can be unclear
- Website for Box Hill Institute (opens in a new tab)
Box Hill Institute
4 campuses, VIC
3.0from 372 Google reviews
What students like
- Teachers are friendly and supportive
- Course content is practical and relevant
What to weigh up
- Admin replies can be slow
- Course organisation can be inconsistent
- Website for Central Queensland University (opens in a new tab)
Central Queensland University
18 campuses
4.1from 999 Google reviews
- Course page for North Metropolitan TAFE (opens in a new tab)
North Metropolitan TAFE
Midland, WA
4.1from 903 Google reviews
- How you study
- On campus
What students like
- Lecturers are helpful and knowledgeable
- Courses provide strong practical skills
- Website for SuniTAFE (opens in a new tab)
SuniTAFE
2 campuses, VIC
3.8from 40 Google reviews
- Website for Chisholm Institute (opens in a new tab)

Chisholm Institute
7 campuses, VIC
3.6from 676 Google reviews
What you’ll learn
20 units: 13 that everyone takes and 7 you choose.
- Safe workshop practices
- Battery testing and servicing
- Brake and steering servicing
- Cooling and engine servicing
- Driveshaft and final drive servicing
- Troubleshooting basic faults
See all 13 core units
Core units
Everyone completes these. Select a unit to see what it covers.
Loading the details for AURAEA002…
Loading the details for AURAEA002…
Questions to ask before you enrol
Providers run this course differently, so the answers change from one to the next.
- When is the next intake, and how many are there each year?
- What is the total cost, including materials, checks and any placement costs?
- Can I study part time or online, and how does that change the length?
- Do the units count towards a higher qualification if I go on to study further?
Questions people ask
Who is this qualification for?
It is for people starting out in an automotive workshop, with no prior experience needed. You will learn to service batteries, brakes, cooling systems, steering, suspension, engines and drive shafts, and carry out general servicing and basic fault tracing. The roles it leads to include Mechanics Assistant and Electrical Trades Assistant.
Do I need experience or other qualifications first?
The qualification itself has no entry requirements. Individual providers can set their own conditions, so check with the provider you choose.